6.5mm Multi Blade Cutter Diamond Segment

6.5mm Multi blade cutter diamond segment

Among with the 6.5mm multi blade for the stone cutting spread on the world, the 6.5mm multi blade cutter diamond segment is more and more popular. All stone factories know the advantage of multi blade and its working efficiency. So that there is a huge number of diamond segments suppliers also rush to the 6.5mm segments. But their qualities are very different, not only between suppliers, but also between batches.

Compared with the 6.5mm multi blade cutter diamond segment from other suppliers, ours are stable quality and high working efficiency. Because we use the diamonds even distribution system which can position each diamond particles in the correct location, to avoid the diamond grits cluster and randomly and vice versa. Then every diamond grit can contribute to the cutting performance.

More detailed features are as follows for your reference.

1). Absolute sharp cutting, it will be 30% up than the normal segments;

2). Stable sharpness of the arix segments;

3). Durable with stable lifespan, you can consider 100%-150% more than that of tradition diamond segments.

4). Universal cutting function;

5). It will be very good to the saw machines, because of its sharp cutting;

6). Lower cutting cost with high working efficiency;

7). Save power much;

8). Excellent cutting performance and cutting surface;

Specail specifications are also available.

Frequent Questions in cutting process:

1). Sparking while cutting:

The sparking phenomenon is also caused by improper distribution of diamonds, or the metal bond is too hard or too soft.

Sparking is a phenomenon that is easily noticed during the cutting process. The essence of sparking is the diamond grits in the segments falls off. We know that in the process of cutting stone, the saw blade must be sparked, but relatively speaking, if the spark is very serious, it means that the quality of the saw blade is not good enough.

The main reason for this is that the metal bond of the diamond segments is not strong enough to hold the diamond particles. Customers who know a little about diamond saw blades also knows that there are various metal bonds options for granite saw blades.

2). Jumping while cutting:

Improper diamond shedding in the granite saw blade will cause jumping, the reason is that the diamond is unevenly distributed in the matrix, some places are too concentrated, and some places are too little distributed;

3). Segment Cracking while cutting :

The sintered of the saw segment is loose, and material segregation will cause the saw blade to fall off during the cutting process.

Hot Tags: 6.5mm multi blade cutter diamond segment, China, suppliers, manufacturers, wholesale, buy, price