News

Treatment Of Problems With Carbide Saw Blades

First, the problem analysis and treatment plan of abnormal sound

1, Saw blade cutting machine with carbide saw blade if found abnormal sound, it is likely that it is due to external factors or excessive external forces caused by the slight deformation of the civil saw blade, thus triggering a warning.

Treatment scenarios: Recorrect the carbide blade.

2, Saw blade cutting machine spindle gap is too large, resulting in beating or skew.

Treatment scenarios:Stop the device and check to see if the installation is correct.

3, Aluminum saw blade substrate has abnormal, such as cracks, silencer lines / holes appear blocked distortion, foreign-shaped attachments, cutting when touching other than cutting materials and so on.

Treatment scenarios: Identify the problem and deal with it for different reasons.


Second, the feed anomaly caused the saw blade cutting machine with carbide saw blade abnormal noise

1, Causing this problem is generally common is the carbide saw blade slip phenomenon.

Treatment scenarios: Readjust the blade

2, Saw blade cutting machine's spindle is stuck

Treatment scenarios: Adjust the spindle according to the actual situation

3, Sawn iron chips blocked in the middle of the sawway or in front of the material


Treatment scenarios: Clean the sawn-off iron chips in time

Third, sawing the workpiece is unstable or the pattern is too obvious or the burrs are too large.

1, This situation is usually due to the carbide saw blade itself improperly handled caused or saw blade needs to be replaced, for example: the base is not qualified, etc.

Treatment scenarios: Replace the blade or re-correct the blade

2, Jagged side grinding unqualified resulting in insufficient precision

Treatment scenarios: Replace the blade or get the factory back to rework.

3, Carbide housing piece teeth or iron chips stuck

Treatment scenarios: If it is tooth loss that must be replaced blade, take back the manufacturer back, if it is iron chips, then clean it up.


You Might Also Like

Send Inquiry