Knowledge

Cellar manhole cover cutting machine maintenance

With the development and progress of society, more and more machinery and equipment are coming to the market. As a new type of mechanical equipment, the pit cover circular cutting machine is widely used in road construction. Most of the time, the operating environment of the manhole cover cutting machine is very harsh, so its maintenance is particularly important.
1. First of all, we must understand the service life of the cutting discs of the pit cover circular cutting machine, replace the cutting discs in time, and check when replacing the new cutting discs. It is strictly forbidden to use deformed or rusted cutting discs.
2. After each construction, the machine should be washed in time. It is forbidden to directly wash the mesh part of the fuselage to avoid short circuit of the machine circuit.
3. After long-term use, lubricant should be added appropriately to reduce wear between parts. Check whether there are debris such as sand and stone in the machine.
4. With the growth of time, a lot of impurities will be deposited in the fuel tank, so we need to clean the fuel tank after a period of time. Otherwise, when there is too much sediment, it will enter the engine with the fuel, which will cause certain damage to the engine and affect the working efficiency of the pit cover circular cutting machine.
5. After cleaning, place the round cellar cover cutting machine in a clean and dry environment, and do not place it in the air.

You Might Also Like

Send Inquiry