Characteristics and manufacturing method of diamond blade
Diamond blade is a common tool for laser cutting, which is widely used in the production of hard and brittle materials such as natural marble and pottery. Diamond blade is mainly composed of two parts: plate and blade. The plate is an important fulcrum part of the bonded blade, and the blade is It is a part of laser cutting in the whole process of use. The blade will continue to be consumed during use, while the plate is not easy. The blade can usually be used for laser cutting because it contains diamond. Diamond is currently the hardest chemical substance. It is produced by friction cutting in the blade. The diamond particles are wrapped in the blade by metal composite material. During the whole process of use, the metal composite body is consumed together with the diamond. Generally, the ideal situation is The metal composite body consumes faster than fine steel, which can not only ensure the sharpness of the blade but also ensure the blade has a longer service life.
With the rapid development of automobiles, airlines and aerospace, the requirements for raw material characteristics and manufacturing expertise are increasing. New materials such as carbon fiber polyurethane elastomer raw materials, fine particle-raised metal composite matrix fiber materials (PRMMC) and structural ceramics are widely used. This kind of material has the characteristics of high tensile strength, good wear resistance, and small thermal expansion coefficient, which determines that the service life of the tools when machining them is very short. The design and development of new wear-resistant and stable superhard milling tools is a research topic for many universities, scientific research institutions and companies' technological innovation. Diamond combines theoretical mechanics, optoelectronic devices, thermals, acoustic materials, optoelectronic devices and many other excellent features. It has very high compressive strength, low frictional resistance, high thermal conductivity, low thermal expansion coefficient and analytical chemical ductility. Ideal raw material for knives.
At present, there are four important production methods of diamond: plastic film coating tool, thick film diamond arc welding electric welding welding tool, diamond calcined body tool and uniaxial crystal diamond tool.
Plastic Film Coated Knives
The plastic film coated tool is a tool made by depositing a diamond plastic film on the raw material with good bending stiffness and high temperature characteristics according to the analytical chemical high-efficiency liquid deposition method (CVD).
Since the thermal deformation system of Si3N4 series pottery, WC-Co series cemented carbide cutting tool and metal composite material W is close to that of diamond, the thermal stress caused by film formation is small, so it can be used as the plate material of the knife body. In WC-Co series cemented carbide cutting tools, the existence of the binder phase Co is easy to cause calcined petroleum coke in the middle of the diamond plastic film and the plate, which reduces the adhesion tensile strength, and it needs to be prepared before accumulation to eliminate the damage of Co (Generally, Co is removed by acid corrosion).
Analytical chemistry high-efficiency liquid deposition method is to use a certain method to activate the acetylene gas containing C source. Under the extremely low gas pressure, the oxygen molecules are piled up in a certain area. diamond phase. The CVD methods currently used to deposit diamond mainly include: microwave heating, hot filament, DC stabilized power supply arc eruption method, etc.
The advantage of diamond plastic film is that it can be applied to a variety of tools with complex patterns, such as blades with drilling, end lathe tools, reamers and twist drills; it can be used for milling many non-metallic materials. The cutting amount is small, the deformation is small, the operation is stable, the destruction is slow, the product workpiece is not easy to deform, and the product workpiece can be finished with good material and small tolerance. The main disadvantage is that the adhesion between the diamond plastic film and the plate is poor, and the diamond plastic film tool is not regrindable.
Diamond Thick Film Arc Welding Welding Tool
The production process of diamond thick film arc welding electric welding welding tools generally includes: the preparation of large-scale diamond film; cutting the diamond film into the shape and specifications necessary for the tool; Grinding and polishing treatment of film tool milling edge. Fabrication and Laser Cutting of Diamond Thick Film
The common method of making diamond thick film is DC power plasma high pressure water jet CVD method. The diamond is deposited on the WC-Co aluminum alloy profile (the surface is made of mirror glass laminated glass), and the diamond film falls off automatically during the cooling process of the plate. This method has a faster deposition rate (up to 930 μm/h), and the lattice is more compact in the middle, but the growth surface is more uneven. The high strength, wear resistance and non-conductivity of the diamond film determine its cutting method is fiber laser cutting (cutting can be carried out in the environment of steam, CO2 and argon). Fiber laser cutting can not only cut the diamond thick film into the required shape and specification, but also cut out the back corner of the tool, which has the advantages of narrow kerf and high efficiency.
Diamond forged body tool
The diamond thick film is produced by the method of extrusion grinding and damage to produce diamond crystals with an average particle size analysis of 32-37μm, or the diamond crystals are obtained immediately by high-pressure method, and the crystal powder is deposited on the WC-16wt%Co aluminum alloy profile , and then protect it with Ta foil, calcined at 5.5GPa, 1500℃ for one hour to make a diamond calcined body, and the turning tool made of this calcined system has high wear resistance.
Single axis crystal diamond tool
The uniaxial crystal diamond tool generally fixes the diamond uniaxial crystal on the top of the fruit cutter head, and the fruit cutter head is fixed on the CNC lathe turning tool boring tool with screws or nuts. The main ways to fix the diamond on the top of the fruit knife are: industrial equipment engineering reinforcement method (grind the bottom of the diamond and the filling surface, and use nuts to fix it on the top of the fruit knife); powder metallurgy industrial method (put the diamond Into the alloy powder, after punching and calcining in the mechanical pump, so that the diamond is fixed on the head of the fruit knife); bonding and brazing method (use inorganic compound binder or other binder to fix the diamond) . Because the coefficient of thermal expansion of the diamond and the plate differs too much, the diamond is easy to loosen and fall off.
Structure
Including the base material and the cutter body, the above base material is provided with convex grooves along the disc-shaped edge, and there are several dovetail grooves evenly distributed on the above convex grooves along the circle, and a chaotic horn-shaped convex wedge is set in the middle of two adjacent horn-shaped concave grooves, Ribs are set in the middle of the root of the convex flute and the bottom of several concave grooves. The above cutter body is fixed on the convex flute composed of trumpet-shaped concave grooves, trumpet-shaped convex wedges and ribs to prevent firing.
Characteristic
Due to the adoption of the above structure, when the knife body is restrained and fired at the convex groove, the knife body can not only be fixed on the base material according to the buckle function of the horn-shaped concave groove, but also use the horn-shaped The combination of the convex wedge and both sides of the rib plate and the surface of the mandrel of the cutter body improves the fixed surface of the cutter body and the base material, thereby completing the firmness of the connection between the cutter body and the base material and the reliability of the use.
