Diamond saw blade sharpening machine
The diamond saw blade sharpening machine is mainly used for sharpening the outer circle of the diamond saw blade. The diameter of the saw blade is 150-230mm (other specifications can be customized according to requirements). When in use, PLC and servo control systems are mainly used, and the efficiency is significantly improved. For saw blades with different diameters, the position of the grinding wheel is automatically adjusted, saving manpower and avoiding human misoperation.
All parameters of the diamond saw blade sharpening machine can be set through the touch screen, and the operation is very simple. The quick clamping system makes the replacement of the saw blade shaft more convenient and quick.
Main features of diamond saw blade sharpening machine
1. Three grinding heads.
2. One-time clamping to complete the sharpening of the entire saw blade.
3. The cooling water system takes away dust and abrasives.
4. Double grinding head, automatic turning, front and back side sharpening at the same time.
The diamond saw blade sharpening machine has two stations and four material tables, automatic loading and unloading, automatic identification of whether there is material, automatic switching of material tables, no shutdown due to loading and unloading, and the feed amount is self-adapted and evenly distributed in each swing Among them, uniform feed is realized, and the amount of feed and the number of swings can be freely set according to the variety of saw blades.
Advantages of using diamond saw blade sharpening machine
1. The diamond saw blade sharpening machine has the functions of shift output and total output counting.
2. Digital display of grinding wheel balance;
3. Adjustable swing range: the swing range of the grinding wheel can be easily adjusted according to the different widths of the cutter heads;
4. The main components are imported from Taiwan: Delta PLC and touch screen, Qilike pneumatic components;
5. Manual operation function: (convenient for machine debugging and separate processing of saw blades) large plate rotation, manual loading, manual unloading, table switching, manual turning, system reset, emergency stop. Front grinding wheel start and stop, reverse grinding wheel start and stop, front clutch open and close, reverse clutch open and close, front saw blade motor start and stop, reverse saw blade motor start and stop, front swing motor start and stop, reverse swing motor start and stop.
6. Separate grinding function on one side: the machine can choose to grind the front and back sides separately (the processing residue can be processed separately)
7. Fully automatic grinding function: just install the unprocessed saw blade and remove the processed saw blade (120 pieces can be loaded at a time);
8. Machine processing efficiency: It takes 8 seconds to process one piece on both sides. The theoretical output of 8-hour shift is 3600 pieces.
9. Processing saw blade specification range: Ф95mm~Ф188mm
10. Grinding wheel consumption: Ф200, 46 grains of silicon carbide can grind about 160 pieces of Ф105 saw blades (double-sided, grinding wheel tail core Ф65).
11. Total machine power: 6.8KW.
