Did you think of these questions when the granite blade was cut?
First, burn the slices when you cut them open. The reason is that the granite saw blade's tire body hard through hard, the head of the diamond drop, it may also be the lack of cutting edge of the early saw blade, resulting in the diamond out of the blade height is not good.
Second, drop the piece when you cut it open. Because the sintering body of granite saw blades is loosely arranged, material dissociation, these will lead to the processing of saw blades off the block.
Third, jump the knife when cutting. Granite blade blades are unevenly dispersed diamond particles, too concentrated may be too rare, will cause diamond drops, and then lead to a jump knife.
Fourth, fire when cut. This phenomenon is also due to diamond particles drop, scattered inappropriately formed, at the same time, the tire body too strong may be too soft will also have an impact.
Fifth, decay when cut. First, in the process of heating sintering of granite blades, the difference between the temperature gradient, powder activity state and low melting point material dispersion between the top of the head and the bottom end of the head led to changes in sintering arrangement and mechanical performance; It will also weaken the arrangement mechanical properties of granite saw blade sintering bodies.
