Knowledge

Analysis of the specific structure and formula of the diamond head

Diamond heads consist of diamond and metal substrates. The proper configuration of diamond and substrate is the key to determine the quality of diamond head. Good diamond inserts in the cutting process, its working surface is concave, that is, low center, side height. It can improve the kneading conditions of the work surface, reduce the lateral pressure, and achieve the goal of improving cutting force and cutting quality. The internal structure of this diamond head is the ratio of diamond to metal substrate. If the working surface becomes a semicircular arc during the cutting process, the contact surface of the head and stone is added, adding cutting resistance, thereby reducing the cutting power. If the operator sees that the cutting speed is slow and then forces the cutting speed and pressure to be added, the blade is sensed, heated, deformed, and violated. After processing, the plate uneven, mainly due to saw blade understanding deformation, wear, cracks and waste, resulting in loss.

Diamond head substrates are also a combination of metal binders. Metal binders are copper, iron, nickel, cobalt, tin, tungsten carbide, zinc and so on. How these elements are properly mixed depends on many theories and the properties of various metals. Today's diamond heads are very competitive. In order to reduce costs and stabilize the market, technicians across the country not only adjusted the formulation, but also used excessive diamond, the cost of the knife to a low. However, the momentum has not decreased, which has brought tangible benefits and profits to the vast stone owners. At lower points, most of the newer head formulations are based on copper and iron, and then add elements such as nickel and tin appropriately. Those expensive metal elements are not used at all, or may be rarely used.

The quality of the diamond head is not only a reasonable substrate, but also the use of diamond.


You Might Also Like

Send Inquiry