Maintenance methods for diamond blades

1, diamond saw blade if not immediately used, should be folded off the sawing table to apply rust-proof oil flat or use the inner hole to hang it, flat diamond saw blade can not stack other items or foot step, and pay attention to moisture, rust prevention.　

2, when the diamond blade is no longer sharp, rough cutting surface, must be removed from the saw stand in time and sent to the diamond saw blade manufacturers for re-grinding (Kyushu creative saw blade can be repeatedly trimmed 2 to 8 times, the maximum service life of up to 4000 hours or more). Diamond saw blade is a high-speed cutting tool, its dynamic balance requirements are quite high, do not give diamond saw blade to non-professional manufacturers to repair, grinding can not change the original angle, and destroy the dynamic balance.

3, diamond saw blade's internal diameter correction, positioning hole processing, etc., must be handed over to the original party. If the processing is not good, it will seriously affect the service life and use effect of diamond saw blades, and may lead to the risk of personal property damage, the expansion of the hole in principle can not exceed the original aperture of 20mm, so as not to affect the balance of stress.