Knowledge

How to select segment ( basic guide for selecting segment )

a ) So called segment, it refers to diamond segment. In masonry, sawing, cutting, grinding, and polishing work are all making use of the nature of diamond, including, its high hardness, high intensity, and high wearability. The blank is used as upholder. Diamond segments usually cost 12.5% of the cutted-stone cost, and for the sake of their high cost, reasonably using and choosing them is more important.

 

b ) The width of segment can be grouped by the error band. The error band should be controlled within 0.05mm in a same blade.

 

c ) When cutting stone, what s really working on the stone are diamond crystals, while the metal bond is used to hold them together. Diamond crystals would be exposed at a certain height, generally at the 20%-60% height of the crystal, it depends on the stone. Different stone has the different requirement for the lowest height exposed.

 

d ) The kerf cutted by the blade is the result integrated by all of the diamond crystals cut.

 

e ) What is blade durability, namely blade lifespan? It is the final acreage(square meter)of the stone cutted by the blade from the its first cutting to its last cutting(when its diamond layer wear off).

 

f ) The superficial quality of saw blade is measured by the surface feature of the stone cutted, including its level condition, smoothness, and avoidance of desquamation. The bad level condition, coarseness, and desquamation all explain low quality of the saw blade.

 

g ) The cutting efficiency is the acreage of the cutted stone in per unit of time. It is the main index for blade's capacity, it is affected  by the cutting depth, cutting speed and cutting time.

 

h ) The four main factors of cutting efficiency, as follow

 

I .Diamond concentration, it decides the cutting lifespan. Too high or too low would go against the cutting efficiency. Its value should be the balance point between user’s requirement and economism.

 

li .Bond, it is decided by stone type, stone concentration, parameter of saw machinery and cooling condition, sometimes operator’s performance should be considered .

 

lii .Diamond grit, its value lies on the hardness of the cutted stone and other factors. The harder the cutted stone is, the smaller the grit is and the more powerful the cutting is.

 

 

 

 

 

 

 

 

 

 

You Might Also Like

Send Inquiry