The safety performance of diamond saw blades
The safety performance of diamond serrated blades is a quality problem that can not be ignored, because the "tooth loss" caused by production or use directly affects the performance of the saw blade and the safety of the operator. In industrial production, there is a certain danger when diamond saw tool is used, for the protection of life and attention, its safety is more and more attention by manufacturers and users. Although the standards and industry standards have not yet made clear and specific provisions on the safety performance of diamond saw blades, but can learn from the relevant international standards, such as the new EN13236 standards and foreign cases of notification of recall problems, improve production processes, improve monitoring means, so as to ensure the safety performance of diamond saw blades.
First, affect the diamond saw blade safety performance factors.
1. The outer round teeth of the substrate are not clean, resulting in a weak welding bond.
2. Sintering process parameters control is not good, sintering temperature is low, "under-burning" makes welding not secure, tire body itself is low strength, fragile.
Second, measures to improve the safety performance of diamond saw blades.
Optimize the design, the use of low oxygen content raw material powder; Change the shape of the outer circle of the substrate to "swallow tooth shape" to improve the binding strength of the fetal body and the substrate.
Optimize the process. The base tooth part adopts the "copper plating" process; The cold pressure-hot sintering process is adopted. Hot-pressure-melting process (i.e. laser welding process). Traditional high-frequency welding, weld binding strength (especially at high temperatures) is not high enough, sawing process is prone to knife collapse and injury and other accidents, saw blade safety and reliability is not good. Laser welding is focused laser beam as energy, the use of deep welding mechanism, melting the head of the transition layer and substrate, forming a solid weld, even if the blade, drill bit without cooling water, can also ensure a high welding strength, to ensure the safety of use.
