The Segmented Rim Diamond Blade

The segmented rim, which can be used in numerous dry cutting applications, is also known by the name "dry cutting blade." As the blade has the roughest cut among the three choices, it works best on masonry materials like brick and limestone. The bonding of segmented blades, which can be used for both wet and dry cutting, is normally medium to hard. These blades may provide a fast, generally smooth cut, but chipping is still possible. When compared to other blades, their lifespan is quite long and they are extremely sturdy.

They work optimally for chopping through stone like marble and granite as well as construction materials like asphalt, brick, and block. They come in a wide range of diameters from very small to extremely huge, but their sweet spot is the market for sizes 12 inches and up. Masonry saws, concrete saws, and circular saws all effectively use this blade to cut through the previously mentioned objects.

Gulets refer to the air pockets that form between the individual parts. The gullets are designed to increase airflow, dissipate heat, and evacuate slurry from the cut, all of which contribute to the blade's continued efficiency. Depending on the material the blade is meant to slice through, its gullets will be a specific size and form.

Blades designed for cutting asphalt often have broader U-shaped gullets than those designed for cutting concrete. The hole should be wider for better heat dissipation if the material is more abrasive. The keyhole, teardrop, and angled gullets are some of the others. Diamond segmented blades with narrow slots are typically used for marble and granite, while keyhole-shaped slot blades are more commonly used for general-purpose cutting.