Why choose our Arix Diamond saw blade
Diamond Blade are now widely used in sawing, cutting, grinding and dressing of stone, concrete and ceramic tiles. This kind of cutting tools have high cutting speed, flexible use, reasonable prices, easy operation and precise sawing surface, so its application is effective.
In order to achieve the optimal sawing conditions, it is necessary to maintain an ideal balance between tool's lifespan and cutting speed. A sharp cutting saw blade can save labor and machine costs, but will reduce the life of the saw blade. In contrast, long-life saw blade will reduce cutting speed and reduce tool costs, but it will increase labors and machine costs. Since the labor cost is one of the main costs of production for users of cutting tools and the trend is increasing costs of workers, so low cutting speeds are not expected today.
A good saw blade must have a long lifespan and maintain a good cutting ability by its own grinding action. Usually using a harder matrix or using more diamonds to extend the life of the saw blade. However, the result will be increasing in cutting load and poor cutting performance.
The concentration of diamond and the particle size of diamond determines the number of cutting points in unit area, which is directly proportional to the concentration of diamond and inversely proportional to the average particle size of diamond. Therefore, we are required to reduce the cutting load while maintaining a suitable or higher saw blade lifespan.
Because of the dilemma between the cutting speed and the lifespan of the saw blade, the user must limit its operating conditions. Now, after years of research and experiments, our company has developed an method Arix diamonds in order to maximize the effect of diamond particles, in order to extend the life of the saw blade and cutting speed. Proved by some tests, the sharpness and life of the Arix diamond segment arrayed blade are improved by 20% -50% on sharpness and 50% -100% on lifespan respectively. Thus, the electricity consumption cost and the labor cost are reduced , too. At the same time, the production efficiency is also improved. So that users get the best experience on the cutting.
